|
Click here for this list in IEEE format.
Journal Publications 2017 “Comparison of micro-CT imaging and histology for approximal caries detection”, in Scientific Reports - Nature 2015 “A novel concept for tissue-metal detection and differentiation using an inductive proximity sensor”, in IOP Conference Series: Materials Science and Engineering 2014 “Weakly convex discontinuity adaptive regularization for 3D quantitative microwave tomography”, in Inverse Problems 2013 “Applicability of an effective conductivity approach in modeling thoracic impedance changes”, in Journal of Physics: Conference Series “Optimal configuration of an electrode array for measuring ventricles' contraction”, in Journal of Physics: Conference Series 2012 “Ambulatory cardiogenic pulmonary edema monitoring as an essential ubiquitous healthcare service – development of a simulation model”, in Journal of Medical Imaging and Health Informatics “Ambulatory cardiogenic pulmonary edema monitoring as an essential ubiquitous healthcare service – development of a simulation model”, in Journal of Medical Imaging and Health Informatics 2009 “2D image registration using focused mutual information for application in dentistry”, in Computers in Biology and Medicine 2007 “La radiographie numérique par soustraction en médecine dentaire”, in Revue Belge de Médecine Dentaire “Overlap insensitive image registration combining MI and feature points”, in Medical Image Analysis “Digitale substractieradiografie in de tandheelkunde”, in Belgisch Tijdschrift voor Tandheelkunde 2005 “Application of the infinite element method to modelling the surroundings in low contrast cases”, in IFMBE Proceedings Series 2004 “A probe for immittance spectroscopy based on the parallel electrode technique”, in Physiological Measurement “Impedance spectroscopy by means of a digital storage oscilloscope-based measurement system”, in Biocybernetics and Biomedical Engineering “Monitoring of deep foundations deflection in model experiments by means of a magnetic method: Theoretical study”, in Archives of Hydro-Engineering & Environmental Mechanics 2003 “Measurements of impedance of dental enamel in low frequency region”, in Annales Academiae Medicae Gedanensis “Metoda pomiarowa dla dwuczestotliwosciowej tomografu elektroimpeadncyjnej”, in Zeszyty Naukowe Wydzialu ETI Politechniki Gdanskiej. Technologie Informacyjne “The effect of irreversible image distortions on the performance of a mutual information-based method for retrospective geometric standardization of bitewing radiographs”, in Journal of Dental Research “Application of desktop micro-CT imaging as gold standard in caries diagnosis”, in Journal of Dental Research 2002 “Advanced signal processing put at the service of caries diagnosis”, in DSP Valley Newsletter “Advanced signal processing put at the service of caries diagnosis”, in DSP Valley Newsletter 1998 “Kijken in de mens: Medische beelden en beeldvorming”, in Het Ingenieursblad 1996 “Contour matching using finite difference method”, in Chinese Journal of Stereology and Image Analysis “Hierarchical contour matching in medical images”, in Image and Vision Computing 1995 “Adiabatic layering: A new concept of hierarchical multi-scale optimization”, in Neural Networks “Adiabatic layering as a new approach to RBF approximation”, in Neural Networks 1994 “An adiabatic neural network for RBF approximation”, in Neural Computing & Applications 1992 “Beeldtechnologie en communicatie”, in VUB Magazine “A data-acquisition system for electronic identification, monitoring and control of group-housed pigs”, in Journal of Agricultural Engineering Conference Publications 2013 “Development of a morphological accurate simulation model to evaluate cardiogenic pulmonary edema monitoring”, in 15th International Conference on Electrical Bio-Impedance (ICEBI) & 14th, Conference on Electrical Impedance Tomography (EIT) 2012 “Range-based prior knowledge in the solution of the inverse problem of electrical impedance tomography”, in 100 years of electrical imaging “Ambulatory cardiogenic pulmonary edema monitoring as an essential ubiquitous healthcare service – development of a simulation model”, in Federated Conference on Computer Science and Information Systems 2011 “A residual minimizing solver for the inverse problem of EIT”, in Proc. 12th International Conference in Electrical Impedance Tomography (EIT 2011), May 4-6, 2011, Bath, UK “Pulse pressure velocity measurement – A wearable sensor”, in Proc. Federated Conference on Computer Science and Information Systems, September 18-21, 2011, Szczecin, Poland 2010 “Desktop x-ray micro CT imaging compared against conventional histological sectioning as a gold standard in cardiology”, in 9th Belgian National Day on Biomedical Engineering 2006 “On the application of digital subtraction radiography in dental caries diagnosis”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet “Retrospective geometric standardization in intra-oral digital subtraction radiography - An evaluation of recent developments”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet 2005 “Application of the infinite element method to modelling the surroundings in low contrast cases”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet 2004 “The residual least squares method, a new variational approach to electrical impedance tomography: Part I. Problem formulation, solution method, and properties”, in IMA "Hot Topics" Workshop Adaptive Sensing and Multimode Data Inversion “Comparative performance of three different methods for retrospective geometric standardization of intra-oral radiographs in case of irreversible image distortions”, in Dental Triangle 2004 “Comparative performance of three registration methods in digital subtraction radiography”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet “Measurement cell - current density analysis”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet 2003 “System do spektroskopii impedancyjnej z wykorzystaniem oscyloskopu cyfrowego”, in XIII Krajowa Konferencja Naukowa, Biocybernetyka i Inzynieria Biomedyczna “Analiza rozkladu pradu w celce do pomiaru parametrów elektrycznych - model MES”, in XIII Krajowa Konferencja Naukowa, Biocybernetyka i Inzynieria Biomedyczna “Analysis of the current distribution in an electrical measurement cell - FEM model”, in Proc. XIII Krajowa Konferencja Naukowa, Biocybernetyka i Inzynieria Biomedyczna, September 10-13, 2003, Gdansk, Poland “Design of a modular impedance tomograph”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet “Electrode arrays applicable to EIT based mine detection: A comparison of spatial sensitivity distributions”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet “Application of desktop micro-CT imaging as gold standard in caries diagnosis”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet “Appraisal of images in EIT”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet “Measurement method for two-frequency impedance tomography”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet “Regularization in EIT”, in Finds and Results from the Swedish Cyprus Expedition: A Gender Perspective at the Medelhavsmuseet 2002 “Selected topics in medical image processing”, in Proc. Recent Trends in Multimedia Information Processing, 9th International Workshop on Systems, Signals and Image Processing, IWWSIP, November 7-8, 2002, Manchester, UK “An active electrode for mixed measurement techniques, with application to EIT”, in Proc. EMBEC 02, 2nd European Medical & Biological Engineering Conference, December 4-8, 2002, Vienna, Austria “Detection of dental lesions by means of immittance measurements - an in vitro study”, in Proc. EMBEC 02, 2nd European Medical & Biological Engineering Conference, December 4-8, 2002, Vienna, Austria “Piecewise multi-linear PDF modelling using an ML approach”, in Proc. SPR2002, 4th International Workshop on Statistical Techniques in Pattern Recognition, August 6-9, 2002, Windsor, Canada 1995 “Hierarchical matching of deformable curves in medical images”, in Proc. Second International Workshop on Image and Signal Processing, Theory, Methodology, Systems and Applications, November 8-10, 1995, Budapest, Hungary 1994 “Adiabatic layering: Beyond hierarchical optimization”, in Proc. EUSIPCO-94, September 13-16, 1994, Edinburgh, Scotland, UK 1993 “Image reconstruction in Electrical Impedance Tomography: A selfadaptive neural network approach”, in Proc. 15th Annual International Conference IEEE Engineering in Medicine & Biology Society, October 28-31, 1993, San Diego, CA Book Publications 2003 “Measurements of impedance of dental enamel in low frequency region”, in Annales Academiae Medicae Gedanensis 2002 “Energy minimisation methods for static and dynamic curve matching”, in Pattern Recognition and String Matching Reports 2009 “An objective methodology for evaluating the mechanical compliance of osteotomy preparations: Part 1 - Final report project "Tools, Technology, Research for implant placement with guided system"” “Analysis of drill debris in/on bone samples: Part 3 - Final report project "Tools, Technology, Research for implant placement with guided system"” “Thermographic analysis of the osteotomy preparation: Part 2 - Final report project "Tools, Technology, Research for implant placement with guided system"” “Drilling Analyzer - Documentation V4.0: Part 4 - Final report project "Tools, Technology, Research for implant placement with guided system"” “Technical Note: Maximizing ellipses within contours: Part 5 - Final report project "Tools, Technology, Research for implant placement with guided system"” “Numerical study of a capacitive through-wall imaging sensor: Final report feasibility study” “Development of an ambulatory transthoracic impedance monitoring device for early diagnosis of impending acute heart failure - Capacitive measurement system: Deliverables 6.1.4 project "Disease management for congestive heart failure"” “Development of an ambulatory transthoracic impedance monitoring device for early diagnosis of impending acute heart failure - Sensitivity study: Deliverables 6.1.4 project "Disease management for congestive heart failure"” “Development of an ambulatory transthoracic impedance monitoring device for early diagnosis of impending acute heart failure - Extended literature survey: Deliverable 6.1.5 project "Disease management for congestive heart failure"” “Capacitive measurement and imaging technology for detection and diagnosis of dental caries - Pilot study” 2007 “Studie van een spectroscopische elektrische impedantietomografietechniek voor de diagnose van tandcaries: Final report project "Study of a spectroscopic electrical impedance tomography technique for diagnosis of dental caries"” “Automated monitoring of aquatic life in remote streams and rivers: Technical report project "Monitoring of aquatic life using a capacitive sensor array technique"” 2006 “Intraoral digital subtraction radiography, and its application to caries detection: Final report project "Intraoral digital subtraction radiography, and its application to caries detection"” “Application of impedance spectroscopy for fish detection: Technical report project "Monitoring of aquatic life using a capacitive sensor array technique"” 2004 “Gestabiliseerde deconvolutiemethodes voor inverse problemen - met toepassing in lineaire (Magnetic Resonance beelvorming) en niet-lineaire (Ground Penetrating Radar beeldvorming) beeldreconstructie -: Final report project "Stabilized deconvolution methods for inverse problems – With application to linear (Magnetic Resonance imaging) and nonlinear (Ground Penetrating Radar imaging) image reconstruction –"” “On the exploration of Electrical Impedance Tomography (EIT) as a novel method for subsurface detection of shallowly buried objects - With application to humanitarian land mine detection -: Final report project "On the exploration of Electrical Impedance Tomography (EIT) as a novel method for subsurface detection of shallowly buried objects – With application to humanitarian land mine detection –"” “Contribution to the development of a novel method of Spectroscopic Electrical Impedance tomography (EIT) with application to the assessment of hidden caries: Final report project "Contribution to the development of a novel method of Spectroscopic Electrical Impedance tomography (EIT) with application to the assessment of hidden caries"” 2001 “Issues in the use of radial functions for surface extraction from scattered image data - Machine vision techniques for model-based compression: Final report WP2, Task3 project "ITA-II, Image processing for integrated and immersive visualisation"” 2000 “A global optimization approach to Electrical Impedance Tomography: Technical Report” “Adiabatic layering: A new concept of hierarchical multi-scale optimization: Technical Report” “Adiabatic layering: Beyond hierarchical optimization: Internal Report” “An adiabatic neural network for RBF approximation” “Beeldtechnologie en communicatie: Technical Report” “Contour matching using finite difference method” “Hierarchical contour matching in medical images: Technical Report” “Hierarchical matching of deformable curves in medical images: Technical Report” “Image reconstruction in Electrical Impedance Tomography: A selfadaptive neural network approach: Technical Report” 1996 “A novel technique of hierarchical contour matching: Technical Report” 1995 “Adiabatic layering as a new approach to RBF approximation” 1994 “An adiabatic neural network for RBF approximation: Theory and simulations” Other Publications 2013 “Applicability of an effective conductivity approach in modeling thoracic impedance changes”, in Journal of Physics: Conference Series 2010 “Desktop X-ray micro CT imaging compared against conventional histological sectioning as a gold standard in cardiology”, in Caries Research “Desktop X-ray micro CT imaging compared against conventional histological sectioning as a gold standard in cariology”, in Proceedings ORCA 2010, 57nd Congress of the European Organization for Caries Research “Desktop x-ray micro CT imaging compared against conventional histological sectioning as a gold standard in cariology”, in Belgian National Day on Biomedical Engineering 2010 2007 “Desktop micro-CT imaging as a novel gold standard in caries diagnosis”, in Caries Research “Subspace-based reconstruction algorithms for the inverse problem of Electrical Impedance Tomography”, in Proc. 6th International Congress on Industrial and Applied Mathematics, July 16-20, 2007, Zurich, Switzerland “A subspace-based inversion algorithm for Electrical Impedance Tomography”, in Proc. NSIP 2007 International Workshop on Nonlinear Signal and Image Processing, September 10-12, 2007, Bucharest, Romania 2006 “A block quasi-totally pivoted LU decomposition”, in Proc. SIAM 2006 Annual Meeting, July 10-14, 2006, Boston, MA “A subspace based structure preserving solution method for the Electrical Impedance Tomography problem: Part I”, in Proc. Int. Workshop Numerical Linear Algebra in Signals and Systems, September 11-15 2006, Monopoli, Italy “A subspace based structure preserving solution method for the Electrical Impedance Tomography problem: Part II”, in Proc. Int. Workshop Numerical Linear Algebra in Signals and Systems, Sep 11-15 2006, Monopoli, Italy “Displacement rank concept for solving the inverse problem of Electrical Impedance Tomography”, in Proc. SIAM 2006 Annual Meeting, July 10-14, 2006, Boston, MA “Reassessing whole tooth Electrical Impedance Spectroscopy measurements”, in Caries Research “Structure preserving solution method for Electrical Impedance Tomography”, in Proc. SIAM 2006 Annual Meeting, July 10-14, 2006, Boston, MA 2005 “An X-ray microtomographic study of SnF2 and YbCl3 uptake and retention in approximal caries lesions”, in Caries Research “On a new class of residual minimizing reconstruction algorithms for Electrical Impedance Tomography”, in Workshop Contribution to the Development of a Novel Method of Spectroscopic Electrical Impedance Tomography - With Application to the Assessment of Hidden Caries -, March 1, 2005, Dental School, Vrije Universiteit Brussel – VUB, Brussels, Belgium 2004 “LS reconstruction methods in Electrical Impedance Tomography”, in Workshop Electrical Impedance Tomography, and Its Application to Humanitarian Land Mine Detection, March 4-5, 2004, Vrije Universiteit Brussel - VUB, Brussels, Belgium 2003 “On a new class of subspace based reconstruction algorithms for Electrical Impedance Tomography”, in Proc. Subsurface and Surface Sensing and Imaging IV, SPIE NDE for Health Monitoring and Diagnostics, March 2-6, 2003, San Diego, CA “The effect of irreversible image distortions on the performance of a mutual information-based method for retrospective geometric standardization of bitewing radiographs”, in Proc. AADR/CADR Annual Meeting, March 12-15, 2003, San Antonio, TX 2002 “Comparative performance of three different methods for retrospective geometric standardization of intra-oral radiographs in case of irreversible image distortions”, in Proc. State of the Art in Medical Technology, Belgian Day on Biomedical Engineering, TI-KVIV, October 18, 2002, Palace of the Academies, Brussels, Belgium “In vitro evaluation of a mutual information based method for retrospective geometric standardization in digital subtraction radiography”, in Caries Research “Subspace concepts and the inverse problem of EIT, a course in numerical algebra”, in The First Mummy Range Workshop on Electrical Impedance Imaging, July 31 - August 7, 2002, Pingree Park, CO 2001 “A new class of approximating inverse solvers for Electrical Impedance Tomography”, in Proc. SIAM Annual Meeting, Minisymposium Detection and Identification of Landmines, July 9-13, 2001, San Diego, CA 1998 “Review Matrix Algorithms - Volume 1 Basic Decompositions”, in Matrix Algorithms - Volume 1 Basic Decompositions 1997 “A global optimization approach to Electrical Impedance Tomography”, in Proc. 19th Annual International Conference IEEE Engineering in Medicine & Biology Society, October 30 - November 2, 1997, Chicago, IL
|
