|
Waveguide based Millimeter wave liquid sensors Presenter Mr. Yuchen Zhang - ETRO, Vrije Universiteit Brussel [Email] Abstract In the frequency range from 30 to 300 GHz, the response of liquid materials under the illumination of electromagnetic waves is determined by the collective behaviour of constituting molecules in the liquids. The addition of bio/chemical compounds causes the change in the spectral response which will also appear in the sensor response of electronic systems. The phenomena can be exploited to develop millimeter wave sensor configurations for accurate liquid sensing applications. However, water absorption together with wavelength to particle ratio severely affects the sensitivity of such a system. In order to overcome these limitations, various factors such as microfluidic design, liquid volume, sensor material, fabrication method, the availability of a theoretical model etc. need to be taken into consideration. This PhD thesis deals with the passive parts of a label-free immobilization-free millimeter wave sensor configuration operating in V-band. Two types of waveguide based sensor configurations are proposed: a) reflection type: based on impedance tuning method. The reflection (S11) parameter is very sensitive to changes of the liquid (84dB water-alcohol signal contrast) with a very narrow operation bandwidth. b) transmission type: based on differential method. The transmission (S21) parameter sensitivity to changes in the liquid is on par with the reflection sensors but with a wider operating frequency band. Different design aspects such as theoretical modelling, numerical validation and optimization with CST microwave studio, fabrication by 3D printing technology and evaluation of the various sensor prototypes with a vector-network-analyzer are discussed within this thesis. The usage of the reflection sensors has also been demonstrated in a variety of application domains. For example, it is proven that the millimeter wave sensor is able to detect both ultra-violet (UV) and non-UV absorbing compounds without the work of labelling for liquid chromatography systems. Also the capability to detect protein binding activities and DNA multiplications is shown. Finally, the future development and applications of the proposed sensor methodology are discussed.
Short CV Master of Science in Electrical Engineering, KU Leuven, 2012
|